عنوان رویداد:
بیست و دومین کنفرانس شیمی معدنی ایران
برگزار شده توسط:دانشگاه کردستان
تاریخ برگزاری : 01 شهريور 1402
عنوان مقاله:
Synthesis of Cu-BTC@Fe3O4 nanocomposites for removal of arsenic from water followed by electrothermal atomic absorption spectrometry determination
نویسندگان:
آرمان شریفی، سلیمان بهار، رحمان حلاج
دانلود فایلArsenic is one of the toxic heavy metals, which is found in soil, air and water resources [1,2]. Arsenic contamination can cause serious health problems, including skin damage, heart, liver, bladder cancer and death [3,4]. World Health Organization (WHO) and the Environmental Protection Agency (EPA) classified arsenic as the first priority contaminant among hazardous substances and declared that the limit of arsenic concentration for drinking water is less than 10 ppb. Accordingly, several technologies have been developed to eliminate arsenic from drinking water including reverse osmosis, chemical coagulation, membrane filtration, ion-exchange, and adsorption methods. Because of its robust usage, high efficiency, and cost effectiveness, adsorption proved to be one of the most promising efficient remediation techniques for As removal. A wide range of adsorbents, including boehmite, alumina, activated carbon, hydrated ferric oxide, fly ash, clays, chitosan resins, activated alumina and cation-exchange resins have been reported for arsenic removal. However, most of the established adsorbents have many limitations such as unsatisfactory capture capacity, slow kinetics, and poor selectivity increasing the need for new efficient adsorbents. In this work, Cu-BTC@Fe3O4 nanocomposites was synthesized by growing H3BTC thin layers joined by carboxyl groups onto Fe3O4 nanoparticles for removal of arsenic from water. The prepared sorbent was characterized using X-ray diffraction (XRD), vibration sample magnetometer (VSM), scanning electron microscopy (SEM) and Fourier transform infrared (FT-IR) techniques. Several factors that may affect the adsorption process, including sample pH, sorbent amount and adsorption time were optimized. The adsorption isotherm indicated that As adsorption fitted best to the Freundlich isotherm model and the maximum adsorption capacity was 91.32 mg/g.
Cu-BTC@Fe3O4 nanocomposites, Removal, Arsenic
برای لینکدهی به این مقاله از آدرس زیر استفاده نمایید:
برای ارجاع در منابع از عبارت زیر استفاده کنید:
شریفی، آرمان، بهار، سلیمان، حلاج، رحمان، 1402، Synthesis of Cu-BTC@Fe3O4 nanocomposites for removal of arsenic from water followed by electrothermal atomic absorption spectrometry determination، بیست و دومین کنفرانس شیمی معدنی ایران، https://conference.uok.ac.ir/fa/archive_index.php?c=HN-iicc22&aid=1517523
دیگر مقالات این رویداد:
- Investigation of nitrate removal from aqueous solution by Clinoptilolite zeolite modified with Cu and Zn
آزاده جدائی، اعظم آفاقی
- Selective Carbon−Carbon Bond Forming Reductive Elimination from Cycloplatinated(IV) Complexes
سوسن کیاوش، مرضیه دادخواه آسمان
- Synthesis and identification of cross-linked chitosan/tripolyphosphat/dacarbazine nano-composite
امیرمحمد حسین پور، نیلوفر درستی
- Synthesis and Characterization of praseodymium zircon as Yellow Pigment
زهره مرتضی ئی، اعظم صادقی، سارا به آئین، مینا آقا بابائیان
- Zinc-cobalt ferrite magnetic nanoparticles as an environmentally friendly, cheap, and effective catalyst for solvent-free one-pot multi-component synthesis of 3,4-dihydropyrimidin-2(1h)-ones
نرجس جمشیدی
- Immobilization of copper complex on the surface of SBA-15: As an efficient nanocatalyst for the synthesis of pyranopyrazole derivatives
شهاب غلامی، محسن نیکورزم، بهمن طهماسبی، آرش قربانی
تماس با ما
ایران، سنندج، بلوار پاسداران، دانشگاه کردستان، معاونت پژوهش و نوآوری
کدپستی: 15175-66177
تلفن: 33624008-087
پست الکترونیک: conference@uok.ac.ir
© کلیه حقوق متعلق به دانشگاه کردستان میباشد. (همایش نگار نسخه 11.0.1 )